Newsflash
|
RSTuner 3.0 release supports EOBD compliant cars (with additional module). 
LAUNCH 'programming made easy' video
|
|
|
Featured Products
Renault RSTuner
€190,00
|
|
|
|
Home
|
|
03 March 2009 |
|
RSTuner 3.0 release supports EOBD compliant cars (with additional module).
LAUNCH 'programming made easy' video
Changelog 3.0
================
Added auto-update function
Added RSTuner module functionality
Added module: legislated OBD II support for ISO 14230-4, ISO 15765-4, J9141-2
Added module: RSTuner Matrix Analysis
Added module: iMFD support
Added DTC filter and moved DTC to seperate tab
Added encrypted .cal file support
Added hardware check (under About)
Added multiple new VINs
Added notification in case of invalid car key when requesting secure ECU access
Fixed ECU erase confirmation check
Fixed firmware detection when not properly disconnected from vehicle
Verify write is now skipped upon write failure
Changed A/D parameters default to deselected for better compatibility with older VCI
Reduced memory footprint during and after loading log file
Changelog 2.5
================
Added new RSTuner hardware & firmware support
Added Premium Control Panel
- transfer your stand-alone live data logs from RSTuner Premium internal storage to PC
- set the output trigger to any available vehicle parameter
- adjust stand-alone live data configuration
Live Data Grid changes
- added parameter selection
- added reset min/max values
- added font size adjustment
Added option to export Live Data log in subtitle format (.srt)
Added adjustable Live Data interval setting
Increased required battery level for write procedures (12.3V)
Sagem 3000 vehicles no longer allowed to do a full ECU write without a battery charger attached
Changelog 2.0
- Added Vista 64 bit / Windows 7 64 bit support
- Added next generation RSTuner hardware support
- Added Injector Recoding Control for DCI vehicles
- Added DF fault codes
- Added support for various new models (see supported vehicles)
- Revised security access procedure
- Added hardware disconnection detection
Changelog 1.7.7 - Added new interface support
Changelog 1.7.3 - Added Wideband raw voltage parameter
- Added wrong .cal file write block
Changelog 1.7 - Added Clio V6 support
- Added saving specific sections of Live Data
- Fixed Live Data saving problem on some vehicle types
Changelog 1.6.7 - Added K4M BB1D/CB1D support
- Changed Live Data log file structure to CSV (see also manual section 4.2.2)
- Changed file names of Live Data and PA logs inside ZIP container
- Fixed Live Data Graph trackbar bug when loading large Live Data log files
- Fixed Save Live Data dialog conflicting with loaded Live Data log parameters on some occasions
- Fixed ini file saving in the wrong location
Changelog 1.6 - Added Clio III, Clio II K4M, Mégane II F4R
- Added Wideband sensor support
- Added profiles to parameter selection
- Optimized Live Data log saving & reading
- Parameters now sorted alphabetically
Changelog 1.5 - Added Performance Analyzer
- Added Zlib compression to log files
- Added checksum check to incoming messages
- Added filename suggestion when saving
- Fixed incorrect manifold absolute pressure calculation (Clio)
- Fixed file open/save dialog filtering
- Fixed transfer activity indication
- Fixed RSTuner not shutting down properly on rare occasions
- Fixed attempting to write programming history even if verify failed
Visit the RSTuner project page to download.
|
|
Last Updated ( 04 November 2009 )
|
|
|
Who's Online
We have 14 guests and 1 member online
|
